| Photo by Jason Kamimura |
| Photo by Markus Alias |
Los Angeles-based burlesque performer Red Snapper keeps you up-to-date on her latest news and shares lessons learned in the world of burlesque.
I'm blogging from outside a theatre where we're about to review a play. Technology is amazing.
As I mentioned earlier today (unless I only imagined it, which is entirely possible given the E6000 fumes I've inhaled today), I have to redo the hem of my gown because I kept stepping on it in rehearsal. My act entrance isn't as strong when I have to keep hiking up my dress. This afternoon I cut 4" off the gown and lining. I got most of the gown rehemmed (by hand because it's faster) in two hours. Maybe I can finish the hems tonight after the play.
Total spent so far: $393.50 and 113:50
I took care of a small task before my studio time this morning. I gathered the tops of my fancy panels. I also trimmed up the bottom of the fancy panels so they wouldn't drag. I discovered during rehearsal that I need to add a few more magnets and secure the panel gathers on my machine.
My rehearsal went really well. I found a great place to play with my under panel, necessitating some thong embellishment. My studio time ended, so I rhinestoned my thong during Snapper Buddy rehearsal. I also took care of the finishing crotch stitching. The gem pattern matches my pasties.
Working in the entire costume, I found a few things to tidy up this afternoon. I'm very pleased with how the costume works.
Total spent so far: $393.37 and 111:50
I came home from work today to find Andrew painting part of the edge of the fourth panel. I have to start the other edge tomorrow morning once the paint is dry, then wrap up the edges on the remaining panel Friday.
I put clear elastic straps on the bra so I don't have to worry about it falling. If they don't work in rehearsal, I have other straps to use. It took a while to stitch them on with my left hand. (You can see them in the photo. What I hope you can't see is the batch of hives I got this evening. I'm afraid I'm allergic to oranges, same as my older sister. Guess I should see that allergist soon.)
I also mathed out where I need to put the washers on the panels. I have to buy ribbon tomorrow to better secure the washers.
Tomorrow I'm headed downtown on a recon mission for the last of my required supplies.
Total spent so far: $349.19 and 101:10
That's right, folks. I hit 100 hours for this costume a few minutes ago. I started off my morning with 40 minutes of painting on the edge of the fourth panel. I then packed up my bra so I could do some rhinestoning at the ol' day job. I spent 10 minutes gluing on the stones in the photo, covering the center gather on the bra. I then added some tiny jonquil stones to the underboob netting on the bra.
Total spent so far: $349.19 and 100:00
And I have Blogger installed on my new phone finally!
| Foul Play Cabaret w/ Red Snapper & Mr. Snapper |
| Friday, April 20, 2012 - 9:00 PM |
| Maxine's Hot Springs, AR |
I spent five hours yesterday between painting, bra stitching and design transfer, and rhinestoning. To finish the edge of the fabric I bonded to the bra, I turned the bra inside out and fastened it around a pillow. (I saw Evie used a pillow to hold a corset on Friday night, so I adapted that technique to what I needed to get done.) I stitched mainly with my left hand, so it took a bit longer. I'm pleased with how it turned out.
I want to share a little more about the design painting process because I don't know if I've really explained it in my prior posts. I took the enlarged design and put it on tracing paper, copying a pattern long enough for the top to bottom of each panel. Andrew then taped wax paper together to put between the tracing paper and the net. (We learned a lesson for the next project; the wax paper isn't as non-stick as we expected. Next time we'll use plastic sheeting or saran wrap.) Andrew secured the design, wax paper and net to a large piece of cardboard with clothespins. Then we used small portions of fabric paint and a paint brush on the design. It takes a lot longer for me to use my left hand, but I am able to paint with either hand because the design is crazy but the lines are simple.
I always make these to-do lists and I don't get them completed. I had much more in mind for today's activities. With the debut of this number next weekend and travel the following weekend, I have plenty of distractions to derail me. I hope this weekend I get it all done and have a chance to catch a movie.
When I couldn't rhinestone any more for the evening, I worked on the rear panel of my skirt. The rear panel consists of five gathered panels that are attached together at the top. I stitched grosgrain ribbon around the top of the panels. I did this because: 1) I don't want the gathered edge to pop open the first time it gets any torque; 2) I may or may not want to remove the rear panel in future; and 3) it makes completion of the yoke embellishments and future repairs easier. I'm going to attach snaps to the grosgrain ribbon and to the yoke for the rear panel. I haven't decided what to use on the sides and front, but I want to avoid velcro because it will snag on the panels.